Your craze for tomatoes has grown so much that now you have set up your tomato plants in your backyard.
As days pass, you see something’s not right. Even though they were growing perfectly, now they have started to shrink as you sit there wondering where did you go wrong.
Let me tell you what you did wrong, genius. One of the prime causes of plants getting dull is insufficient and improper watering. Water keeps the soil moisturized and gives the root enough moisture to grow.
So here we are with our guide on the best way to water tomatoes so that you can enjoy fresh and ripe tomatoes without them getting diseased or dead.
Best Way to Water Tomatoes
Keep on reading as we elaborate the process and the do’s and don’ts when it comes to watering tomatoes. While developing your own guidelines, be sure to maintain the following guidelines for maximum effectiveness.
Hopefully, you will gain enough knowledge and grow fresh and ripe tomatoes by taking proper care of them.
The main part of the tomato that needs water and nutrients is the root, which is located in the deep part of the soil. Watering thoroughly will increase the survival chance of the plant even during dry spells. A good rule of thumb is to water the plant at least six to eight inches deep in the soil.
From countless other ways of watering, here is a clever one. Take some gallon-sized cans and cut their top portion. Punch some holes and lay them on the ground in a way so that only one-inch size of the can shows up above the ground level.
The ideal option is to use two cans near each tomato plant. Don’t forget to fill them up two or three times per week. The amazing thing about this method is that the water flows through the area surrounding the root of the plant, and very little water is wasted.
Your tomatoes need water to maintain their activities. And that is why you need to water them sufficiently and slowly so that enough water reaches the root.
Watering slowly ensures enough time for the water to flow through to the root. There are countless drip irrigation systems for you to choose from.
You can even develop your own by investing as low as $2. A good drip irrigation system will ensure the maximum effectivity of watering.
Water is needed to keep your tomatoes moisturized, but overdoing it will harm the plant. Here is what happens when you put excess water, the soil gets soggy, and the root fails to get enough air that they need to grow.
The question is, how will you figure out whether your tomatoes need watering or not? It’s quite simple.
If they look a little limp, especially during a sweltering summer night, they are good on water supply. But if the same scenario occurs during the day, water them as soon as possible.
In the absence of rain, water your tomatoes in an interval of four to five days when you feel like the soil is light and sandy. And when you feel that the soil is heavy, water them every seven to ten days to ensure proper irrigation.
Water During Morning
While watering your tomatoes, the smartest thing that you can do is to water them during the early hours of the day. Why? Because less water is wasted due to evaporation and there is ample time for the water to get dried out.
Watering during the night is a really bad idea as it might trigger a number of diseases for your plants. Also, you can’t do it in the middle of the day as the evaporation loss occurs most during that time.
Automate the Watering
So far, we have discussed how to water your tomatoes on your own. But what happens when you are away or on a vacation? You have less chance of watering them, and they are likely to suffer from damage due to improper treatment.
We might just have the solution for you, consider the following to automate the watering process for your tomatoes.
1. Drip Irrigation Systems
Easy to operate and maintain, drip irrigation systems are very cheap to build and is one of the most effective methods for programmed watering. Especially when you are out there working or enjoying your time on a vacation, you will find drip irrigation systems quite helpful.
The most astonishing thing about this system is that you can even program the time of watering your plant daily.
2. Using Basin
If you are growing your tomatoes on pots, putting them on a water basin will be quite easy. Be cautious, though; the pot should be above the basin water level to prevent overflow. Remember the holes you had made in the pots? Now those will take in water.
Although there should be enough leverage between the pot and the water to prevent the root from overflowing with water.
Mulching is a process where materials such as decaying leaves, compost, or bars are spread around the plants to insulate the soil. Among countless other methods, mulching is amazing that maintains the moisture of your plants’ soil. This is the most effective method if you are going on short trips for 2 to 3 days. However, mulching depends on the local condition and works well in most cases.
If you want the core of your tomatoes to retain a good amount of moisture, use a mulch.
Applying just the right amount will be good for you to go. Just try to avoid overdoing it.
While watering your tomatoes, the most important thing to keep in mind is that you should water them sufficiently and avoid overflowing. The time of the day is also needed to be taken into consideration as it relates to the effectiveness of the watering. The best way to water tomatoes is to set up a drip irrigation system that will automatically get the job done for you.